Battery Switches

In stock
ALED125-1
8616 (Including tax)
+
Pre-Order
BS3001
    Includes AFD (Alternator Field Disconnect) Meets American Boat and Yacht Council (ABYC) requirements for battery switches Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Accepts two 4/0 AWG (95mm²) battery cables Specifications Cranking Rating: 10 sec. 2,750 Amps Intermittent Rating: 5 min. 900 Amps Continuous Rating 600 Amps Maximum Voltage Rating 48 Volts DC Terminal Stud Size 1/2" (M12) Terminal Stud Torque 220 in-lb (24.86 N·m) max. Mounting Holes Accept 1/4" (M6) Screw Cable Size to Meet...
Brand: BLUE SEA
14548 (Including tax)
+
In stock
BS6006
(Mini) Battery Switch Single Circuit ON/OFF Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Cranking Rating: 10 sec. 1,500 Amps Intermittent Rating: 5 min. 500 Amps Continuous Rating 300 Amps Maximum Voltage Rating 48 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 120 in-lb (13.56 N·m) max. Mounting Holes Accept #10 Screw Cable Size to Meet Ratings 4/0 AWG (95mm²) Cable Clearance For 4/0 AWG Cables 1.12"...
Brand: BLUE SEA
3910 (Including tax)
+
Pre-Order
BS7702
500 Amp magnetic latching switch provides high amperage switching under load, manually or from remote locations Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing LED output to remotely indicate switch state - requires optional LED 3∕ 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance 7∕ 8" (22 mm) stud length accepts multiple cable terminals Label recesses for circuit identification Silver alloy contacts provide high reliability for switching live loads
Brand: BLUE SEA
29227 (Including tax)
+
Pre-Order
BS8132
AC Source Selector Double pole AC main circuit breakers with installed lockout slide Prevents connecting both AC sources simultaneously Maximum panel amperage - 50 AMP Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed in all circuit positions
Brand: BLUE SEA
29663 (Including tax)
+
In stock
GS11208
Single pole battery switch. Copper contacts. Removable handle. Contínua Intermitente Marca Ø Unidades x skinpack...
Brand: Goldenship
3184 (Including tax)
+
In stock
GS11209
Single pole battery switch manufactured in black plastic finish with brass electrical contacts.
Options (5):
300A500A
Brand: Goldenship
3338 (Including tax)
In stock
GS11211
Single pole battery switch made of polycarbonate and non-corrosive marine grade metals. Dimensiones base: 67 x 67 mm. Capacidad: Cont­nua/continuous 250 A. Rating Intermitente/intermittent 350 A. Ref. Envase/Pack GS11211 Removable handle 1 x skinpack
Brand: Goldenship
2769 (Including tax)
+
In stock
GS11212
Battery selector switch made of polycarbonate and non-corrosive marine grade metals. Capacidad: Cont­nua/continuous 250 A. Rating Intermitente/intermittent 350 A. Ref. Dimensiones Envase/Pack GS11212 ext. 133 mm 1 x skinpack
Brand: Goldenship
3979 (Including tax)
+
Pre-Order
GS11214

Main battery switch

Brand: PERKO
9550 (Including tax)
+
Pre-Order
GS11217
Battery selector switch made of polycarbonated housing, copper contacts and brass terminals. With alternator field disconnect. For systems up to 32V. Capacity : Continuous 380 A / Intermittent 850 A
Brand: Goldenship
24395 (Including tax)
+
Pre-Order
QUS12NB

Double pole battery switch 120 A 24V

9038 (Including tax)
+
In stock
SFBIS101
Max 50V 275A Max 1250A 100 x 104 x 114mm BATTERY ISOLATOR SWITCH 2 POSITION Single pole battery switch made of ABS and non-corrosive marine grade metals. Battery Switch with Key 275A
Brand: SEAFLO
1951 (Including tax)
+
In stock
SFCBS175402
BATTERY ISOLATOR SWITCH 3 POSITION 6-12-24-32V 175A Max 300A
Brand: SEAFLO
4638 (Including tax)
+
In stock
SFCBS275201
BATTERY ISOLATOR SWITCH 2 POSITION Single pole battery switch made of ABS and non-corrosive marine grade metals. 275 A 455 A Sea Flo 73 x 73 x 74 mm 1
Brand: SEAFLO
2408 (Including tax)
+
In stock
MP604KB
Product Identifiers GTIN 5013008206041 BRAND Maypole MPN MP604KB 1537837583 Product Key Features Manufacturer Part Number MP604KB
381 (Including tax)
+
In stock
BS9003E
  Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches Specifications Cranking Rating: 10 sec. 2,000 Amps Intermittent Rating: 5 min. 600 Amps Continuous Rating 350 Amps Maximum Voltage Rating 48 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 140 in-lb (15.82 N·m) max. Mounting Holes Accept 1/4" (M6) Screw Cable Size to Meet Ratings 4/0 AWG (95mm²) Cable Clearance For 4/0 AWG Cables 1.10" (27.9mm) Weight...
Brand: BLUE SEA
6504 (Including tax)
+
In stock
BS5510E
Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches Specifications Cranking Rating: 10 sec. 1,000 Amps Intermittent Rating: 5 min. 525 Amps Continuous Rating 350 Amps Maximum Voltage Rating 32 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 140 in-lb (15.82 N·m) max. Mounting Holes Accept 1/4" (M6) Screw Cable Size to Meet Ratings 4/0 AWG (95mm²) Cable Clearance For 4/0 AWG Cables 1.10" (27.9mm) Weight...
Brand: BLUE SEA
9368 (Including tax)
+
Pre-Order
BS9004E
  Includes AFD (Alternator Field Disconnect) Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches Specifications Cranking Rating: 10 sec. 2,000 Amps Intermittent Rating: 5 min. 600 Amps Continuous Rating 350 Amps Maximum Voltage Rating 48 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 140 in-lb (15.82 N·m) max. Mounting Holes Accept 1/4" (M6) Screw Cable Size to Meet Ratings 4/0 AWG (95mm²) Cable Clearance...
Brand: BLUE SEA
8694 (Including tax)
+
In stock
GS11210
Single pole battery switch made of polycarbonate and non-corrosive marine grade metals. Dimensiones base: 67 x 67 mm. Capacidad: Cont­nua/continuous 250 A. Rating Intermitente/intermittent 350 A. Ref. Envase/Pack GS11210 Fixed handle 1 x skinpack
Brand: Goldenship
2747 (Including tax)
+
Pre-Order
GS11215
Battery selector switch made of polycarbonated housing, copper contacts and brass terminals. For systems up to 32 V Capacidad: ContŒ_Œ«_nua/continuous 250 A. Rating Intermitente/intermittent 360 A. Ref. Dimensiones/dimensions Envase/Pack GS11215 _ŒÊ_Œ«_ 133 mm. x Alt.67 mm 1 x skinpack
Brand: PERKO
7391 (Including tax)
+
In stock
BS6011
(Mini) Battery Switch Dual Circuit Plus™ Make before break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Cranking Rating: 10 sec. 1,000 Amps Intermittent Rating: 5 min. 450 Amps Continuous Rating 300 Amps Maximum Voltage Rating 32 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 120 in-lb (13.56 N·m) max. Mounting Holes...
Brand: BLUE SEA
7239 (Including tax)
+
Pre-Order
BS9012
Hermetically sealed contacts / vaporproof Ignition protected - safe for installation aboard gasoline powered boats Activated by an ON-OFF switch mounted anywhere integrated coil control minimizes heating and amperage draw 450 Amp Class Designed for 12 or 24 Volt systems Ignition protected -- safe for installation aboard gasoline-powered boats Activated by a low amperage ON-OFF switch mounted anywhere Specifications Cranking Rating: 10 sec. 1,500 Amps* Cranking Rating: 1 min. 850 Amps* Intermittent Rating: 5 min. 600 Amps* Continuous Rating 450 Amps* Nominal Voltage 12/24 Volt DC Rated Switch Cycles...
Brand: BLUE SEA
30524 (Including tax)
+
In stock
BS9002E
Includes AFD (Alternator Field Disconnect) Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches Specifications Cranking Rating: 10 sec. 2,000 Amps Intermittent Rating: 5 min. 600 Amps Continuous Rating 350 Amps Maximum Voltage Rating 48 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 140 in-lb (15.82 N·m) max. Mounting Holes...
Brand: BLUE SEA
7694 (Including tax)
+
Pre-Order
BS7900
7900 7900200 Spare Key 0.10 (0.05)
Brand: BLUE SEA
461 (Including tax)
+
In stock
GS11207
Single pole battery switch. Copper contacts. Removable handle. For systems up to 24 V. Diametro exterior 58mm. Capacidad: Cont­nua/continuous  150 A. Rating Intermitente/intermittent 1000 A. (5 seg.)      
Options (5):
BrassStainless Steel
Brand: Goldenship
8026 (Including tax)
Pre-Order
GS11216
Main battery switch made of polycarbonated housing, copper contacts and brass terminals. For systems up to 32 V Capacidad: ContŒ_Œ«_nua/continuous: 250 A. Rating Intermitente/intermittent: 360 A. . Ref. Dimensiones/dimensions Envase/Pack GS11216 _ŒÊ_Œ«_ 133 mm. x Alt.67 mm 1 x skinpack
Brand: PERKO
7092 (Including tax)
+
Pre-Order
BS7700
Includes ML-Series Remote Control Contura Switch 2145 Manual control switch provides an added level of safety allowing control with or without power, and offering "Locked Off" capability for servicing 500 Ampere continuous rating for engine, inverter, house loads, and emergency battery combine Magnetic latching draws no current in "ON" or "OFF" state, only draws current when changing state of switch Silver alloy contacts provides high reliability for switching live loads 3/8" -16 tin-plated copper studs for maximum conductivity and corrosion resistance 7/8" (22mm) stud length accepts multiple cable terminals Label...
Brand: BLUE SEA
29227 (Including tax)
+
In stock
BS6005
(Mini) Battery Switch Single Circuit ON/OFF Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Cranking Rating: 10 sec. 1,500 Amps Intermittent Rating: 5 min. 500 Amps Continuous Rating 300 Amps Maximum Voltage Rating 48 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 120 in-lb (13.56 N·m) max. Mounting Holes Accept #10 Screw Cable Size to Meet Ratings 4/0 AWG (95mm²) Cable Clearance For 4/0 AWG Cables 1.12"...
Brand: BLUE SEA
4346 (Including tax)
+
Pre-Order
BS7902
7902 Circuit Identification Label Kit
Brand: BLUE SEA
884 (Including tax)
+
Pre-Order
BS3003
      Includes AFD (Alternator Field Disconnect) Meets American Boat and Yacht Council (ABYC) requirements for battery switches Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Accepts two 4/0 AWG (95mm²) battery cables Specifications Cranking Rating: 10 sec. 2,750 Amps Intermittent Rating: 5 min. 700 Amps Continuous Rating 500 Amps Maximum Voltage Rating 48 Volts DC Terminal Stud Size 1/2" (M12) Terminal Stud Torque 220 in-lb (24.86 N·m) max. Mounting Holes Accept 1/4" (M6) Screw Cable...
Brand: BLUE SEA
15173 (Including tax)
+
In stock
BS5511E
Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches Specifications Cranking Rating: 10 sec. 1,000 Amps Intermittent Rating: 5 min. 525 Amps Continuous Rating 350 Amps Maximum Voltage Rating 32 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 140 in-lb (15.82 N·m) max. Mounting Holes Accept 1/4" (M6) Screw Cable Size...
Brand: BLUE SEA
8878 (Including tax)
+
Pre-Order
GS11205
Single pole battery switch manufactured in brass and high impact plastic. Copper contacts. Removable handle. For systems up to 24 V. Capacidad: ContŒ_Œ«_nua/continuous 250 A. Rating: Intermitente/intermittent 2500 A. (5 seg.) Ref. Dimensiones Envase/Pack GS11205 Distancia entre agujeros: 100 mm 1 x skinpack Distance between holes: 100 mm
Brand: Goldenship
11719 (Including tax)
+
Pre-Order
BS6010
(Mini) Battery Switch Dual Circuit™ Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Cranking Rating: 10 sec. 1,000 Amps Intermittent Rating: 5 min. 450 Amps Continuous Rating 300 Amps Maximum Voltage Rating 32 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 120 in-lb (13.56 N·m) max. Mounting Holes Accept #10 Screw Cable Size to Meet Ratings 4/0 AWG (95mm²) Cable Clearance For 4/0 AWG...
Brand: BLUE SEA
6357 (Including tax)
+
In stock
BS6007
(Mini) Battery Switch Single Circuit ON/OFF Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Cranking Rating: 10 sec. 1,500 Amps Intermittent Rating: 5 min. 500 Amps Continuous Rating 300 Amps Maximum Voltage Rating 48 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 120 in-lb (13.56 N·m) max. Mounting Holes Accept #10 Screw Cable Size to Meet Ratings 4/0 AWG (95mm²) Cable Clearance For 4/0 AWG...
Brand: BLUE SEA
5220 (Including tax)
+
Pre-Order
BS7649
Blue Sea 7649 BS7649 Solenoid Mini Add A Battery   The ADD-A-BATTERY is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source The Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave. Dual Circuit Plus™ Battery Switch Simplifies switching Isolates engine and house circuits Combines batteries for emergency starting...
16847 (Including tax)
+