Irish Flag  IRELAND BASED STORE- WE SHIP ALL OVER EUROPE -   Euro Symbol  FREE DELIVERY TO IRL FOR ORDERS OVER €80  Netherlands Flag  FREE DELIVERY TO NETHERLANDS OVER €100

ACCOUNT SIGN IN | RESET PASSWORD | DELIVERY INFO |

All categories

Cleats Clutches & Jammers

Sort by Position: Low to High
50 Per Page
Barton Bullseye Swivel/Cleat 42601
Pre-Order
BA42601
Featuring a newly designed swivel and profiled swivel arm, the Swivel Bullseye is now fitted with a unitary bullseye leading to a Kevlar K Cam and top fairlead. Overall the unit is 45grams lighter than its predecessor and rotates even more easily. It’s ideal for cabin top control lines up to 12mm where adjustability from any angle is required, such as the kicking strap on a race boat, jib sheets on a pocket cruiser or spinnaker boom downhaul. Max Line Dia: 12mm Base Dia: 58mm Fastenings Dia: 5mm Weight: 172g
€8792 (Including tax)
+ −
Add to cart
Barton 165mm (6.5") Nylon Sliding Cleat Fits 25mm (0.98") 'T' Track
Pre-Order
BA51253
Barton Marine - 165mm (6.5") Nylon Sliding Cleat Fits 25mm (0.98") 'T' Track A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position. When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat. Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags. 25mm (0.98") cleats have an extruded aluminium base,...
€6101 (Including tax)
+ −
Add to cart
Barton 200mm (7.9") Nylon Sliding Cleat Fits 25mm (0.98") 'T' Track 51254
Pre-Order
BA51254
Barton 200mm (7.9") Nylon Sliding Cleat Fits 25mm (0.98") 'T' Track A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position. When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat. Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags. 25mm (0.98") cleats have an extruded aluminium base, nylon...
€7043 (Including tax)
+ −
Add to cart
Barton Aluminum Sliding Cleat 175mm (6.89") Fits 32mm (1.26") 'T' Track 51322
Pre-Order
BA51322
A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position. When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat. Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags. 32mm (1.26") cleats have an extruded aluminium base, cast aluminium cleat and plunger type lock.
€18948 (Including tax)
+ −
Add to cart
Barton Aluminum Sliding Cleat 205mm (8") Fits 32mm (1.26") 'T' Track 51323
Pre-Order
BA51323
A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position. When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat. Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags. 32mm (1.26") cleats have an extruded aluminium base, cast aluminium cleat and plunger type lock.
€21930 (Including tax)
+ −
Add to cart
Barton Stanchion Cleat Nylon 111mm 52100
In stock
BA52100
Barton Stanchion Cleat Nylon 111mm A neat fitting designed to fit over stanchions or pulpit/ pushpit rails. Fits in seconds and will not damage tube. Designed to fit onto stanchions, pulpits and pushpits of 25mm dia Easy to fit with many uses Ideal for fenders O/A Length: 111mm
€2435 (Including tax)
+ −
Add to cart
Barton Shroud Cleat With Eye - Nylon 52111
Pre-Order
BA52111
Barton 52111 - Shroud Cleat With Eye. Simply clamp onto shroud wire (max 8mm Dia) without causing damage. This cleat features a wide eye opening for stowage of halyard shackles. Length: 100mm Weight: 26g
€1873 (Including tax)
+ −
Add to cart
Barton Tubular Cleats
In stock
BA52121
Barton Tubular Cleats Available in 2 sizes, these handy cleats have many uses where light loads are expected. Length: 55mm or 80mm Fastening Diameters: 4mm or 6mm Weight:6g or 8g Internal Bore Diameter:8mm or 13mm
Size:
55m80mm
Brand: Barton Marine
€477 (Including tax)
Select a Variation
Barton Open Cleats
In stock
BA52140
Barton Open Cleats - Nylon Black nylon open cleats in various sizes.
Size:
75mm100mm130mm170mm210mm245mm
Brand: Barton Marine
€407 (Including tax)
Select a Variation
​Barton K Cam Cleat Mini 70100
Pre-Order
BA70100
Barton Marine K Cam Cleat Mini 70100 K cam cleat manufactured from a composite kevlar/zytal material. this gives advanced performance over carbon fibre and glass reinforced models to give strength , good wear and light weight. K cam bases feature a stainless steel wear bar for prolonged life.. The K cam utilses stainless leaf springs which give a smooth but positive action. They are also stronger and have a longer life than conventional wire springs used in other models A progressive tooth design ensures maximum holding power on all types of line whilst creating minimum wear on either cam or line. Max Line: 10mm...
€2752 (Including tax)
+ −
Add to cart
Barton Marine K Cam Cleat With F/Lead Mini 70101
In stock
BA70101
Barton Marine K Cam Cleat With F/Lead Mini 70101 K cam cleat manufactured from a composite kevlar/zytal material. this gives advanced performance over carbon fibre and glass reinforced models to give strength , good wear and light weight. K cam bases feature a stainless steel wear bar for prolonged life. The K cam utilses stainless leaf springs which give a smooth but positive action. They are also stronger and have a longer life than conventional wire springs used in other models. A progressive tooth design ensures maximum holding power on all types of line whilst creating minimum wear on either cam or line. Max Line dia...
€3109 (Including tax)
+ −
Add to cart
Wire Front Fairlead for Barton Mini Cam Cleats 70104
Pre-Order
BA70104
Wire Front Fairlead for Barton Mini Cam Cleats Made from stainless steel and locate securely into the cleat base.
€406 (Including tax)
+ −
Add to cart
Barton Pillar Fairlead Only Gray for ‘K’ Cam Mini 70105
Pre-Order
BA70105
Cam can be fitted either way round to achieve a lead from either in front or behind. Stainless steel pillars add strength and wear resistance. ‘K’ cam cleat not included.
€807 (Including tax)
+ −
Add to cart
Barton Top Fairlead Only Gray for ‘K’ Cam Mini 70106
Pre-Order
BA70106
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 9 mm Width: 15 mm Fastening Ø: 4 mm
€499 (Including tax)
+ −
Add to cart
Barton Pillar Fairlead Only Green for ‘K’ Cam Mini 70115
Pre-Order
BA70115
Cam can be fitted either way round to achieve a lead from either in front or behind. Stainless steel pillars add strength and wear resistance. ‘K’ cam cleat not included.
Contact us for a price
Contact us for a price
Barton Top Fairlead Only Green for ‘K’ Cam Mini 70116
Pre-Order
BA70116
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 9 mm Width: 15 mm Fastening Ø: 4 mm
€499 (Including tax)
+ −
Add to cart
Barton Pillar Fairlead Only Red for ‘K’ Cam Mini 70125
Pre-Order
BA70125
Cam can be fitted either way round to achieve a lead from either in front or behind. Stainless steel pillars add strength and wear resistance. ‘K’ cam cleat not included.
Contact us for a price
Contact us for a price
Barton Top Fairlead Only Red for ‘K’ Cam Mini 70126
Pre-Order
BA70126
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 9 mm Width: 15 mm Fastening Ø: 4 mm
€499 (Including tax)
+ −
Add to cart
Barton Pillar Fairlead Only Yellow for ‘K’ Cam Mini 70135
Pre-Order
BA70135
Cam can be fitted either way round to achieve a lead from either in front or behind. Stainless steel pillars add strength and wear resistance. ‘K’ cam cleat not included.
€764 (Including tax)
+ −
Add to cart
Barton Top Fairlead Only Yellow for ‘K’ Cam Mini 70136
Pre-Order
BA70136
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 9 mm Width: 15 mm Fastening Ø: 4 mm
€499 (Including tax)
+ −
Add to cart
Barton Wedge Mount for ‘K’ Cam Mini 70140
Pre-Order
BA70140
Wedge Mount Mini Ideal for adjusting the cleating angle for maximum efficiency.
€327 (Including tax)
+ −
Add to cart
Barton K Cam Cleat Top Caps​ for ‘K’ Cam Mini 70141
Pre-Order
BA70141
Barton K Cam Cleats Top Caps Mini Supplied in packs containing 2 each of red, green and yellow cam top caps.
€829 (Including tax)
+ −
Add to cart
​Barton K Cam Cleat Midi 70200
Pre-Order
BA70200
Barton Marine K Cam Cleat Midi 70200 K cam cleat manufactured from a composite kevlar/zytal material. this gives advanced performance over carbon fibre and glass reinforced models to give strength , good wear and light weight. K cam bases feature a stainless steel wear bar for prolonged life.. The K cam utilses stainless leaf springs which give a smooth but positive action. They are also stronger and have a longer life than conventional wire springs used in other models A progressive tooth design ensures maximum holding power on all types of line whilst creating minimum wear on either cam or line. Max Line: 6-12mm Fastnings:...
€3296 (Including tax)
+ −
Add to cart
​Barton K Cam Cleat With F/Lead Midi 70201
Pre-Order
BA70201
Barton K Cam Cleat With F/Lead Midi 70201 K cam cleat manufactured from a composite kevlar/zytal material. this gives advanced performance over carbon fibre and glass reinforced models to give strength , good wear and light weight. K cam bases feature a stainless steel wear bar for prolonged life. The K cam utilses stainless leaf springs which give a smooth but positive action. They are also stronger and have a longer life than conventional wire springs used in other models A progressive tooth design ensures maximum holding power on all types of line whilst creating minimum wear on either cam or line. Max Line: 6-12mm...
€3718 (Including tax)
+ −
Add to cart
Wire Front Fairlead for Barton Midi Cam Cleats 70204
Pre-Order
BA70204
Wire Front Fairlead for Barton Mini Cam Cleats Made from stainless steel and locate securely into the cleat base.
€435 (Including tax)
+ −
Add to cart
Barton Pillar Fairlead Only Gray for ‘K’ Cam Midi 70205
Pre-Order
BA70205
Cam can be fitted either way round to achieve a lead from either in front or behind. Stainless steel pillars add strength and wear resistance. ‘K’ cam cleat not included.
€956 (Including tax)
+ −
Add to cart
Barton Top Fairlead Only Gray for ‘K’ Cam Midi 70206
Pre-Order
BA70206
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 12 mm Width: 20 mm Fastening Ø: 5 mm
€807 (Including tax)
+ −
Add to cart
Barton Top Fairlead Only Green for ‘K’ Cam Midi 70216
Pre-Order
BA70216
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 12 mm Width: 20 mm Fastening Ø: 5 mm
€807 (Including tax)
+ −
Add to cart
Barton Top Fairlead Only Red for ‘K’ Cam Midi 70226
Pre-Order
BA70226
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 12 mm Width: 20 mm Fastening Ø: 5 mm
€807 (Including tax)
+ −
Add to cart
Barton Wedge Mount for ‘K’ Cam Midi 70240
Pre-Order
BA70240
Wedge Mount Midi Ideal for adjusting the cleating angle for maximum efficiency.
€383 (Including tax)
+ −
Add to cart
Barton K Cam Cleat Top Caps​ for ‘K’ Cam Midi 70241
Pre-Order
BA70241
Barton K Cam Cleats Top Caps Midi Supplied in packs containing 2 each of red, green and yellow cam top caps.
€979 (Including tax)
+ −
Add to cart
Barton K Cam Cleat Maxi 70300
Pre-Order
BA70300
Barton Marine K Cam Cleat Max 70300 K cam cleat manufactured from a composite kevlar/zytal material. this gives advanced performance over carbon fibre and glass reinforced models to give strength , good wear and light weight. K cam bases feature a stainless steel wear bar for prolonged life.. The K cam utilses stainless leaf springs which give a smooth but positive action. They are also stronger and have a longer life than conventional wire springs used in other models A progressive tooth design ensures maximum holding power on all types of line whilst creating minimum wear on either cam or line. Max Line: 14mm Fastnings: 5mm...
€3847 (Including tax)
+ −
Add to cart
Barton Marine K Cam Cleat With F/Lead Maxi 70301
Pre-Order
BA70301
Barton Marine K Cam Cleat With F/Lead Maxi 70301 K cam cleat manufactured from a composite kevlar/zytal material. this gives advanced performance over carbon fibre and glass reinforced models to give strength , good wear and light weight. K cam bases feature a stainless steel wear bar for prolonged life. The K cam utilses stainless leaf springs which give a smooth but positive action. They are also stronger and have a longer life than conventional wire springs used in other models. A progressive tooth design ensures maximum holding power on all types of line whilst creating minimum wear on either cam or line. Max Line dia : 14mm...
€4337 (Including tax)
+ −
Add to cart
Wire Front Fairlead for Barton Maxi Cam Cleats 70304
Pre-Order
BA70304
Wire Front Fairlead for Barton Maxi Cam Cleats Made from stainless steel and locate securely into the cleat base.
€512 (Including tax)
+ −
Add to cart
Barton Pillar Fairlead Only Gray for ‘K’ Cam Maxi 70305
Pre-Order
BA70305
Cam can be fitted either way round to achieve a lead from either in front or behind. Stainless steel pillars add strength and wear resistance. ‘K’ cam cleat not included.
€1124 (Including tax)
+ −
Add to cart
Barton Top Fairlead Only Gray for ‘K’ Cam Maxi 70306
Pre-Order
BA70306
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 15 mm Width: 25 mm Fastening Ø: 5 mm
€889 (Including tax)
+ −
Add to cart
Barton Pillar Fairlead Only Green for ‘K’ Cam Maxi 70315
Pre-Order
BA70315
Cam can be fitted either way round to achieve a lead from either in front or behind. Stainless steel pillars add strength and wear resistance. ‘K’ cam cleat not included.
€1092 (Including tax)
+ −
Add to cart
Barton Top Fairlead Only Green for ‘K’ Cam Maxi 70316
Pre-Order
BA70316
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 15 mm Width: 25 mm Fastening Ø: 5 mm
€889 (Including tax)
+ −
Add to cart
Barton Pillar Fairlead Only Red for ‘K’ Cam Maxi 70325
Pre-Order
BA70325
Cam can be fitted either way round to achieve a lead from either in front or behind. Stainless steel pillars add strength and wear resistance. ‘K’ cam cleat not included.
€1092 (Including tax)
+ −
Add to cart
Barton Top Fairlead Only Red for ‘K’ Cam Maxi 70326
Pre-Order
BA70326
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 15 mm Width: 25 mm Fastening Ø: 5 mm
€889 (Including tax)
+ −
Add to cart
Barton Pillar Fairlead Only Yellow for ‘K’ Cam Maxi 70335
Pre-Order
BA70335
Cam can be fitted either way round to achieve a lead from either in front or behind. Stainless steel pillars add strength and wear resistance. ‘K’ cam cleat not included.
€1092 (Including tax)
+ −
Add to cart
Barton Top Fairlead Only Yellow for ‘K’ Cam Maxi 70336
Pre-Order
BA70336
Re-inforced composite top fairlead which is easily retro-fitted to your K Cams. ‘K’ cam cleat not included. Height: 15 mm Width: 25 mm Fastening Ø: 5 mm
€889 (Including tax)
+ −
Add to cart
Barton Wedge Mount for ‘K’ Cam Maxi 70340
Pre-Order
BA70340
Wedge Mount Maxi Ideal for adjusting the cleating angle for maximum efficiency.
€1092 (Including tax)
+ −
Add to cart
Barton K Cam Cleat Top Caps​ for ‘K’ Cam Maxi 70341
Pre-Order
BA70341
Barton K Cam Cleats Top Caps Maxi Supplied in packs containing 2 each of red, green and yellow cam top caps.
€1129 (Including tax)
+ −
Add to cart
​Barton K Cam Cleat Mini 70600
Pre-Order
BA70600
Barton Marine K Cam Cleat Mini 70600 K cam cleat manufactured from a composite kevlar/zytal material. this gives advanced performance over carbon fibre and glass reinforced models to give strength , good wear and light weight. K cam bases feature a stainless steel wear bar for prolonged life. The K cam utilses stainless leaf springs which give a smooth but positive action. They are also stronger and have a longer life than conventional wire springs used in other models A progressive tooth design ensures maximum holding power on all types of line whilst creating minimum wear on either cam or line. Max Line: 10mm...
€2343 (Including tax)
+ −
Add to cart
Barton K Cam Cleat Midi 70601
Pre-Order
BA70601
Barton Marine K Cam Cleat Midi 70601 K cam cleat manufactured from a composite kevlar/zytal material. this gives advanced performance over carbon fibre and glass reinforced models to give strength , good wear and light weight. K cam bases feature a stainless steel wear bar for prolonged life.. The K cam utilses stainless leaf springs which give a smooth but positive action. They are also stronger and have a longer life than conventional wire springs used in other models A progressive tooth design ensures maximum holding power on all types of line whilst creating minimum wear on either cam or line. Max Line: 6-12mm...
€2649 (Including tax)
+ −
Add to cart
Barton K Cam Cleat Maxi 70602
Pre-Order
BA70602
Barton Marine K Cam Cleat Max 70602 K cam cleat manufactured from a composite kevlar/zytal material. this gives advanced performance over carbon fibre and glass reinforced models to give strength , good wear and light weight. K cam bases feature a stainless steel wear bar for prolonged life.. The K cam utilses stainless leaf springs which give a smooth but positive action. They are also stronger and have a longer life than conventional wire springs used in other models A progressive tooth design ensures maximum holding power on all types of line whilst creating minimum wear on either cam or line. Max Line: 14mm Fastnings: 5mm...
€2951 (Including tax)
+ −
Add to cart
Barton Cruiser Handle Insert Pack for DO 550 Cluthes 81540
Pre-Order
BA81540
Barton 81540 - Cruiser Handle Insert Pack. Qty 7. Removeable inserts for the top face of handle. Contains: Main Genoa 1 Spin Halyard 1 Topping Lift Spin Pole Up Spin Pole Down Blank
€1258 (Including tax)
+ −
Add to cart
​Barton Racer Handle Insert Pack for DO 550 Cluthes 81541
Pre-Order
BA81541
Barton 81541 - Racer Handle Insert Pack. Qty 12. Removeable inserts for the top face of handle. Contains: Reef 1 Cunningham Reef 2 Kicker Mainsheet Genoa Furling Genoa 2 Spin Halyard 2 Backstay Outhaul Downhaul Blank
€2068 (Including tax)
+ −
Add to cart
Spare Handle for Barton DO 550 Rope Clutches 81545
Pre-Order
BA81545
Spare Handle to suit the Barton DO 550 Rope Clutches Fits the following clutches: BA81500 BA81501 BA81502
€927 (Including tax)
+ −
Add to cart
Previous
1 2
Next