Hydraulic Jack Plates & Trim Kits

Pre-Order
CMC65501
CMC65501 - POWER-LIFT w/GAUGE PL-65HD OB V-8 =<400H
2,19925 (Including tax)
+
Pre-Order
CMC13022Q
Adaptors kit for motors mounted with transom clamps.
23318 (Including tax)
+
Pre-Order
CMC13001Q
CMC PT-130 Tilt and Trim for up to 130 HP Electric Hydraulic Tilt & Trim You Get Power Tilt & Trim, Better Boat Handling, More Speed, Lower Fuel Consumption and No More Back Strain! PT-130 FEATURES: • Rated for 130 H.P. and Smaller Motors. • 6" Set Back to Enhance Boat Stability and Performance. • 20° of Trim and a Total of 90° of Tilt and Trim. • 1/2" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners. • Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust! • Standard B.I.A. Bolt Hole Pattern. • Convenient Adapter Kit Available for Clamp-on Motors. • Four Stainless Steel Motor...
1,50687 (Including tax)
+
In stock
CMC13002Q
CMC PT-130 Tilt and Trim for up to 130 HPElectric Hydraulic Tilt & TrimYou Get Power Tilt & Trim, Better Boat Handling, More Speed, Lower Fuel Consumption and No More Back Strain!PT-130 FEATURES:• Rated for 130 H.P. and Smaller Motors.• 6" Set Back to Enhance Boat Stability and Performance.• 20° of Trim and a Total of 90° of Tilt and Trim.• 1/2" 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners.• Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!• Standard B.I.A. Bolt Hole Pattern.• Convenient Adapter Kit Available for Clamp-on Motors.• Four Stainless Steel Motor Mounting Bolts Included.
1,06441 (Including tax)
+
Pre-Order
CMC65001Q
Made of 6061 T6 extruded aluminum alloy and fastened with stainless steel fasteners. It utilizes an all thread stainless steel screw centrally located for uniform lift and positive alignment. The motor bracket moves up and down on the transom bracket by use of rollers matched from aluminum-bronze alloy (same as hydraulic CMC Power-Lift). There is 5" of verticle adjustment, with 5-1/2" set back from transom. Designed to fit any standard motor up thru V-6, 300HP without drilling holes or making modifications. The Power-Lift provides the added convenience of adjusting from the top or the bottom. Guage & Control included.
1,94720 (Including tax)
+
In stock
CMC61001Q
Made of 6061 T6 extruded aluminum alloy and fastened with stainless steel fasteners. It utilizes an all thread stainless steel screw centrally located for uniform lift and positive alignment. The motor bracket moves up and down on the transom bracket by use of rollers matched from aluminum-bronze alloy (same as hydraulic CMC Power-Lift). There is 5" of verticle adjustment, with 10" set back from transom. Designed to fit any standard motor up thru V-6, 300HP without drilling holes or making modifications. The Power-Lift provides the added convenience of adjusting from the top or the bottom. Guage & Control included.  ...
2,07988 (Including tax)
+
Pre-Order
CMC52100D
Save your back from stress with the new PT-35. The PT-35 is a lighter, more compact Tilt and Trim unit manufactured for 35 horsepower motors and smaller(Down to 2 H.P.). This unit is 11-1/2 inches wide and weighs only 24 lbs! The PT-35 utilizes the same hydraulic actuator as the PT-130 and gives you all the same benefits. This unit easily adapts to bolt-on motors and clamp-on motors (*within the 11 inch frame) without the need of an adapter.Experience Convenience & Improved PerformanceThe PT-35 incorporates a 5 1/2 inch setback, which enhances boat stability and enables the prop to get a better "bite" at a higher prop setting. With...
1,08030 (Including tax)
+
Pre-Order
THAHJM-4DP
SMALL OUTBOARD HYDRAULIC JACK 75HP Features For Small Outboards - Max Weight 425 lbs / Great For Shallow Water Boats - Gheenoes, River Runners, Jon Boats, Skiffs Get Out of Trouble Fast - lifts in 8 Seconds  Lightweight - only 23 Pounds Fish "Skinny Water" With Confidence Self Contained Hydraulics  Small Footprint - Only 14-5/8" Wide and 11-1/2" High Clamp-On Motor Adapter (part # AHJM-CMA-DP) allows you to mount smaller engines with clamp-on brackets to the ATLAS Micro Jacker, since they do not mount with bolts on the standard BIA engine hole pattern Contact your boat manufacturer or local dealer for setback...
1,82627 (Including tax)
+
Pre-Order
PAL1531152
Description Suitable up to 300HP V6 1/2 inch 6061-T6 Aluminium Alloy 2 piece unit, weighs 6.5kg Sets outboard back 1/2 inch from original setup. The 5 inch Vertical Extension allows the motor to be mounted 5 inches higher than the standard mounting on the transom. Ideal for mounting a 25″ inch shaft on a 20″ transom. One advantage is that the powerhead of the outboard is further out of the spray and splash zone. Price includes GST Our customers have used this unit to mount 60 to 300 hp motors. These are popular, although we have struck problems where the flange on the outboard may be an interference fit with the two...
Brand: PALBY
PRODUCT LEAD TIME WHEN ORDERING: 7-14 DAYS WHEN DUBLIN STOCK SHOWING 0
35672 (Including tax)
+