Hempel High Protect Epoxy Primer

Pre-Order
Availability: For ONLINE ORDERS ONLY
For ONLINE ORDERS ONLY. Items will be dispatched within 2-7 Days.
0
Dublin Stock
0
Barcelona Warehouse
Stock locations #
Dublin Stock 0
Barcelona Warehouse

0

0.00
(0 reviews) Write a review
Q136180
Colour: Grey, Size: 750ml
3936 (Including tax)
+
Add to cart
Or Use PAYPAL
  • BRAND/CROSS REFERENCE
  • DELIVERY INFORMATION
  • RETURNS POLICY
  • REVIEWS

Description

Hempel High Protect Epoxy Primer

Hempel Gel Protect SFE200 is a two component amine adduct cured solvent-free epoxy high build primer. It forms a hard, tough and water resistant coating.

A solvent free two component high build epoxy. For use above and below the waterline. An excellent osmosis protection or treatment which can be applied at, and will dry to, a very high film thickness. Can be a substitute for Light Primer where solvent emissions are a consideration. Do not thin.

Minimum Application Temperature : 5°c

Application Methods :

Temp Touch Dry Recoat (min/max) Thinners / Tool Cleaner Coverage
10°c 22-27 hrs 18 hrs -11 Days Thinners No: 1 (Brush) 6.6m2/ltr
20°c 10-12 hrs 8 hrs - 5 Days Thinners No: 3 (Spray) 6.6m2/ltr

Available Colours :

Preparation & Application

Wash with suitable detergent, followed by high pressure fresh water cleaning.

Glass fibre: The surface to be abraded to an even roughness (grinding paper, grit size 80-100). Remove dust.

Steel: Abrasive blasting to Sa 2½, ISO 8501-1:2007, surface profile corresponding to Rugotest No. 3, BN 11.

Application

Use only where application and curing can proceed at temperatures above: 10°C/50°F. The temperature of paint itself should be 15°C/59°F or above. The surface must be completely clean and dry at the time of application and its temperature must be above the dew point to avoid condensation.

Glass fibre: For osmosis repair apply minimum 2 coats of 350 micron/14 mils dry film thickness each (for roller application minimum 4 coats of 150 micron/6 mils dry film thickness each). In case of preventive treatment apply minimum 1 x 350 micron/14 mils dry film thickness (for roller application minimum 2 coats of 150 micron/6 mils dry film thickness each).

Steel: minimum 3 coats of each 150 micron/6 mils dry film thickness.

For further information on technical and safety information please refer to files provided in the technical and safety tab above

The colour's shown should be used as a guide only due to the varying degrees in monitor colour management

For further help and information on what antifouling system to choose please refer to the Hemple antifoul guide in the technical and safety tab above

YOUR DELIVERY PRICE

+

Please choose your location for calculate shipping cost.

You may also be interested in