Primers & Undercoats

In stock
YPA400/A2.5LT
International Interprotect is a high performance two pack primer/undercoat. Easy to apply and quick drying, Interprotect is available in two colours choices, White or Grey An epoxy polyamide primer that can be recoated with itself for up to 6 months Easy to sand and quick to dry Good abrasion resistance Offers excellent anticorrosive protection Can be used as an antifouling tie-coat over existing epoxy primers Use in these areas Suitable for above  and below waterline Hull Bilge/Lockers Exterior cabin/trims Interior cabin/trims Propeller Drive Use for substrates Aluminium / Zinc-Galvanised Steel...
Colours (1):
GreyWhite
Options (1):
2.5 l750 ml
Colours (1): White
Options (1): 2.5 l
13899 (Including tax)
Pre-Order
YEA729/2.5
Colour: Black, Size: 2.5lt
VC Tar2 is a 2-component epoxy primer which protects against osmosis in GRP, and provides anti-corrosive protection on steel and alloy. It provides a smooth surface without sanding. Compatible with VC Tar. Thinners: VC General Thinners Coverage: 11.3m2/1lt
Colour:
BlackWhite
Size:
2.5lt
Colour: Black
Size: 2.5lt
14499 (Including tax)
In stock
13201-10000-2-5
Colour: White, Size: 2.5lt
Colour:
BlueMid GreyWhite
Size:
2.5lt750ml
Brand: HEMPEL
Colour: White
Size: 2.5lt
6205 (Including tax)
In stock
26030-19000-750
2759 (Including tax)
+
In stock
26030-19000-2-5
7167 (Including tax)
+
In stock
45551-12170-750
Colour: Stone Grey, Size: 750ml
Two part component high performance epoxy light primer and undercoat suitable to use above and below the waterline. Use on glassfibre, wood, steel and aluminium surfaces. Superb corrosion, impact and water resistant. Can also be used for osmosis protection when application is required at low temperatures. Minimum application temperature: 5°c Temp 10°c 20°c Touch Dry 6 hrs 3 hrs Recoat (min/max) 8 hrs - 60 Days 4 hrs - 30 Days Thinners/Tool Cleaner Thinner No:5 Brush (845) Thinner No:5 Brush (845) Coverage 8.2 m2/ltr 8.2 m2/ltr Suitable to apply with brush, spray or roller.
Colour:
BlueOff WhiteStone Grey
Size:
2.5lt750ml
Brand: HEMPEL
Colour: Stone Grey
Size: 750ml
4764 (Including tax)
In stock
45441-50711-750
4764 (Including tax)
+
In stock
35780-13700-750
Hempel High Protect II Primer - Cream - 2.5L Hempel's High Protect II 35780 is a two-component, solvent-free, high-build epoxy for osmosis protection and treatment. Easy to apply with good tolerance to environmental conditions. Forms a hard, tough, water-resistant coating. For use as a primer below the waterline on boats made of glass fibre or steel. Prevention and repair of osmotic blistering in the glass fibre both above and below the waterline. Temp Touch dry Re-coat (min/max) Thinner / Tool cleaner Covers 10°C 24hrs 18hrs - 11 days Thinner No 5 6.6m²/l 20°C 12hrs 8hrs...
Colours (1):
CreamGrey
Options (1):
2.5 l750ml
Brand: HEMPEL
Colours (1): Grey
Options (1): 750ml
4690 (Including tax)
Pre-Order
SK4P524100400
Special one-component primer for direct application onto metals such as brass, bronze, aluminium and steel. It can be overcoated with one or two component paints and in particular, for boat propellers, with CONTENDER ELICHE antifouling. Provides excellent adhesion onto the substrate as well as for the following coats. SURFACE PREPARATION AND APPLICATION PROCEDURE METAL (BOAT PROPELLERS): Degrease the surface with a suitable solvent (nitro, epoxy or polyurethane based. Sandblast if possible or in alternative sand with coarse grain sandpaper (80-100 grit). The substrate should have a suitable anchor pattern. Do not use old sandpaper...
3452
+
Pre-Order
YUG879/750
Colour: Blue/Grey, Size: 750ml
International Pre-Kote White International's Pre-Kote is an undercoat for one pack finishes such as Toplac, Brightside, Danboline and Interdeck. Pre-Kote offers excellent obliteration which in turn, allows for easy colour changing. Pre-Kote is designed around tough, flexible resins which means it is long lasting and easy to apply and rub down. It provides a smooth base for the finishing coat. Pre-Kote is suitable for all suitably primed wood, steel, alloy and GRP surfaces . Not suitable for permanently immersed areas. Features: Use Pre-Kote as an undercoat for Toplac or Interlux Super yacht enamels. Excellent...
Colour:
Blue/GreyWhite
Size:
750ml
Colour: Blue/Grey
Size: 750ml
2894 (Including tax)
In stock
YPA984/750
Size: 750ml
Product Description A quick drying, general purpose below waterline primer which has been formulated for use on metal keels and hulls prior to antifouling. It is however also suitable for use as a barrier/sealer coat between unknown or incompatible antifoulings. Coverage: 5.6m2/750ml Application Details - Primocon Area Below the waterline Finish/Sheen Matt Thinner: YTA085...
Size:
2.5lt750ml
Size: 750ml
3095 (Including tax)
In stock
YPA275/2.5
Size: 2.5lt
International Yacht Primer International Yacht Primer is a general purpose metallic grey primer for use on wood, steel and alloy above the water line only.
Size:
2.5lt750ml
Size: 2.5lt
8395 (Including tax)
Pre-Order
YEA729/1
Colour: Black
VC Tar2 is a 2-component epoxy primer which protects against osmosis in GRP, and provides anti-corrosive protection on steel and alloy. It provides a smooth surface without sanding. Compatible with VC Tar. Thinners: VC General Thinners Coverage: 11.3m2/1lt Black or White
Colour: Black
6464 (Including tax)
+