Wind

Pre-Order
PAL1830891
Weather station in timeless design. With Radio-controlled time and date and barometer. With this weather station you can easily measure indoor and outdoor temperature and humidity. It has a barometer and the ability to predict the weather, based on changes in barometric pressure and temperature. It is also possible to save min/max values. The outdoor sensor also has a display that shows temperature and humidity. Displays outdoor and indoor temperature: -40 to +65?. Displays outdoor and indoor humidity: 20% to 99%. Memory for min. and max. humidity and temperature. Outdoor unit can stand up to 100 m...
Brand: PALBY
PRODUCT LEAD TIME WHEN ORDERING: 7-14 DAYS WHEN DUBLIN STOCK SHOWING 0
6549 (Including tax)
+
Pre-Order
010-01142-30
Affordable, Dedicated Wind Instrument Glass-bonded backlit monochrome LCD display lens avoids fogging Large, easy-to-read black digits on white or customizable background colors for high contrast and high visibility in all lighting conditions 2 data fields and a digital wind rose simultaneously display true and apparent wind data, Steer Pilot, boat speed and more Displays true and apparent wind speed and wind angles, true wind direction, boat speed, speed over ground, VMG, heading, course over ground and closed haul NMEA 2000® network and ANT technology interfaces It's Easy to See the Data You Need If you own a 20 to...
53953 (Including tax)
+
Pre-Order
010-01616-10
The Information You Need to Set Sail Includes GNX™ Wind instrument and gWind™ Wireless 2 transducer With a compatible GPS chartplotter, GNX Wind provides 2 data fields and a digital wind rose to simultaneously display true1 and apparent wind data, Steer Pilot, boat speed and more Displays true1 and apparent wind speed and wind angles, true1 wind direction, boat speed, speed over ground, VMG, heading, course over ground and closed haul Includes easy-to-install gWind Wireless 2 transducer, which eliminates cables for masts up to 15m (50 ft) Internal solar-charged battery lasts 3 years and is easily...
88430 (Including tax)
+
Pre-Order
NASACLIP-TRUWWIND
Clipper Wireless Wind True display c/w MHU & Data box The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel's 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter...
39948 (Including tax)
+
In stock
NASACLIP-TWIND
Clipper Tactical Wind System A high performance instrument system that shows almost instantaneous changes of wind speed and direction. In demanding conditions, where high performance is essential, the Clipper Tactical wind system is the ideal choice. With ten updates every second it responds very quickly to the changes in wind speed and direction, which occur during tricky manoeuvres. The sensor is supplied complete with a mast mounting kit, 20 metres of light weight cable and all necessary electrical connectors to complete the installation. The output data is in the NMEA 0183 format and can be used to drive any compatible display...
30888 (Including tax)
+
Pre-Order
NASACLIP-TWNDRP
Clipper True Wind Repeater The Clipper True Wind Display shows apparent wind speed and direction and, when connected to a log or GPS, it can also show true wind speed and direction. Display Unit Supply voltage nominal 12 Volts Supply current 10mA + (10mA for back light illumination Max) NMEA input sentence MWV Back light - 9 levels Pointer style - 2 Display wind speed - 0 to 99 Kts Display Wind angle - 0 to 360 degrees represented by 60 segments Display case size 110 x 110mm NMEA boat speed input either VHW from log or RMC from GPS for True wind speed and direction. True wind display unit - The Clipper True Wind Display shows...
11893 (Including tax)
+
Pre-Order
NASACLIP-WIND
Clipper Wind V2 The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M.P.H. or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a ‘windex’ style indicator. The new masthead unit has NMEA 0183 output sentence MWV and supplied with 20 metres of cable. Clipper Wind system is supplied complete with Display unit, masthead unit with cable and mounting blocks. Technical...
27730 (Including tax)
+
Pre-Order
NASACLIP-WNDRPT
Clipper NMEA Wind Repeater The Clipper Wind repeater unit shares the same 110mm square case as all its sister instruments in the Clipper range. The display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M.P.H. or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a 'windex' style indicator. Features Consumption, 10mA + (25mA for display illumination max) 7 levels of display backlighting Complete with 10 metre cable
9850 (Including tax)
+
In stock
NASACLIP-WWIND
Clipper Wireless Wind c/w MHU & Data box The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel's 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends...
39948 (Including tax)
+
Pre-Order
NASACRU-WIND
Cruiser Wind system V2 Supply voltage Nominal 12v DC. Consumption, 50mA+ (25mA for display illumination max). NMEA Compatible. Keypad adjustment of masthead alignment. 7 levels of display backlighting. Display case size 110 x 110mm. Depth behind panel 30mm. Anemometer head 210 x 140mm.
22943 (Including tax)
+
Pre-Order
NASACRU-WINDREP
Cruiser Wind NMEA repeater Technical Specifications Cruiser Wind NMEA Repeater Large High resolution 360 degree display of apparent Wind direction User selectable pointer style User selectable Windspeed in knots, M.P.H or K/M/H Blue backlighting Simple Operation Low current consumption – 35mA @ 12V + 20mA for backlight
11027 (Including tax)
+
Pre-Order
NASACRU-WW
Cruiser Wireless Wind system The Cruiser wireless wind is supplied with a wireless masthead transmitter, a base unit and a Cruiser Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel’s 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Cruiser...
38575 (Including tax)
+
In stock
NASATAR-WIND
Target Wind V2 NMEA Full 360 degree display of apparent wind. No dead quadrant. Digital wind speed in knots. keypad adjustment of mast-head alignment. Large display, back-lit for night use. Supply voltage nominal 12v DC. Compact cockpit display unit 132 x 98 x 30mm. Low current consumption. Supplied complete with masthead unit and 20 metre cable.
21552 (Including tax)
+
Pre-Order
NASATAR-WW
Target Wireless Wind System The Target wireless wind is supplied with a wireless masthead transmitter, a base unit and a Target Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel’s 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the...
40713 (Including tax)
+
Pre-Order
NASATAR-WWREP
Target Wind NMEA repeater Nasa Target NMEA Wind Display Repeater PLEASE NOTE: This is a repeater display only and not a replacement for a master display!  Technical Specifications Full 360 degree display of apparent wind No dead quadrant Digital wind speed in knots Large display, back-lit for night use Supply voltage nominal 12v DC Compact cockpit display unit 132 x 98 x 30mm Low current consumption
9587 (Including tax)
+
Pre-Order
NASA3WIREMHU
V2 Wind mast head unit 3 wire The Clipper Wind NMEA Repeater has user a selectable pointer style and selectable wind speed scale. It requires the standard NMEA 0183 MWV data sentence. (Supplied as standard equipment to the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit.)
24103 (Including tax)
+
In stock
NASA5WIREMHUONLY
Wind mast head unit Clipper, Target and Cruiser MK1 5 wire without 20M cable Masthead unit for all MK1 Clipper, Target and Cruiser Wind systems. It is fitted with a short cable with waterproof connector to connect to your existing 20 metre long cable/connector.  
17216 (Including tax)
+
Pre-Order
NASACLIP-WINDDS
Clipper Wind Display MK1 5 wire Spare Clipper Wind master display unit complete with weather cover This connects to the 5 wire analogue output mast head unit.
19090 (Including tax)
+
Pre-Order
NASAEXT/MHU5M
5 Metre Wind Ext. cable Nasa Wind 5M Extension Cable.
2386 (Including tax)
+
Pre-Order
NASAEXTCAB/MHU
20 Metre Wind MHU Ext. cable (Bare) V2 Nasa Masthead wind transducer extension cable Version 2 with bare wires for the early type masthead units without the masthead connectors. Used to extend transducer cable by upto a further 20mtrs.
3905 (Including tax)
+
Pre-Order
NASAEXTCABMHUV1
20 Metre Wind MHU Ext. cable (Plug) V1
4295 (Including tax)
+
In stock
NASAWINDCUPS-W
Spare wind anemometer cup kit. Spare anemometer cup assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units.
2197 (Including tax)
+
Pre-Order
NASAWINDVANE-W
Wind vane kit - 5 wire/Meteoman MHU / White Spare wind vane assembly with fixings and illustrated fitting instructions for Clipper, Target and Cruiser masthead units
2197 (Including tax)
+
Pre-Order
NASAWINDVNE-WT
Wind vane kit - Wireles & Tactical- White Nasa Spare Wind Vane Kit White for Wireless, Tactical and NMEA Masthead Units Note: Does not fit the older style masthead units - please check which version you have. EAN no: 0799439091870
2066 (Including tax)
+
Pre-Order
010-01616-00
The gWind Wireless 2 transducer offers an easy-to-install solution that eliminates running wires through masts up to 15 m (50 ft). Accurate wind signals are sent via an ANT® connection directly to a GNX™ Wind instrument or compatible Garmin GPSMAP® 8400 series or GPSMAP 7400 series chartplotters. The transducer features renowned Nexus® twin-fin technology with a 3-bladed propeller, providing accurate wind speed and a stable wind angle in lighter wind conditions. Also available in wind and sail packs (sold separately) that can be used as standalone wind systems or expanded to full network systems via NMEA 2000®.
68862 (Including tax)
+
Pre-Order
T70216
Raymarine i70s System Pack (Wind/Depth/Speed) With 3M Cable Kit The Raymarine i70s instrument display is packed full of powerful features but remains very easy and slick to use. The large 4" LCD screen is a model of clarity for superb visibility at distance and acute angles. 4" over-sized LCD display with 160º viewing angles 43mm digits in full screen mode Anti-reflective coating for improved visibility in bright sunlight New LightHouse user interface is simple and quick to use AIS repeater and display of AIS targets Data views include: Wind, Speed, Depth, Tridata, Engine (NMEA 2000), Environmental (NMEA 2000), Fuel (NMEA...
1,83885 (Including tax)
+
Pre-Order
GS41355
ANEMOMETER meteos 1Handheld anemometer. Wind speed units in km/h, m/s,knots, mph, fps and BeaufortInstant windspeed. Average windspeed (3s. 24h.). Maximum windspeed.Temperature measuring, minimum, average and maximum.Wind chill factor calculation
14639 (Including tax)
+
Pre-Order
GS41354
ANEMOMETER EOLE 1Handheld anemometer. Wind speed units in km/h, m/s,knots, mph, fps and BeaufortInstant windspeed.Average windspeed (3s. 24h.).Maximum windspeed
13031 (Including tax)
+
Pre-Order
GS41356
anenometer skywatch wind green
7600 (Including tax)
+
Pre-Order
GS41357
anemometer skywatch wind swiss color
8299 (Including tax)
+
Pre-Order
PAL1830892
Professional weather station with color display and wifi connection. Reliable weather data in a simple and easy-to-assemble device. Complete station, which measures temperature and humidity outside and inside, wind direction, wind speed and with rain gauge. Possibility to save min / max values and set alarms on these. The barometer also has the ability to predict the weather and give an indication of whether it will be sunny, partly sunny, cloudy, rain or snow. • Color screen • Touch buttons • Wifi module • Auto upload of data to server • Retrieves correct time and data from the network • Indoor (-10˚C - + 60˚C) and outdoor...
Brand: PALBY
PRODUCT LEAD TIME WHEN ORDERING: 7-14 DAYS WHEN DUBLIN STOCK SHOWING 0
18386 (Including tax)
+
Pre-Order
NASACANBUSWSYS
NMEA 2000 WIND SYSTEM Now available – NASA Marine are delighted to announce the introduction of the new NASA Marine NMEA 2000 compliant wind system. The product consists of our version 2 mast head sensor and a small translator box, the box is fitted with a ‘micro-c’ connector which plugs directly into an existing NMEA 2000 network. NMEA 2000 Compliant Wind system is supplied complete with masthead unit, 20 metres of cable, mast head unit mounting hardware and the translator box with Micro C connector cable. Available now.
26358 (Including tax)
+
In stock
NASACANBUSWINDBOX
NMEA 0183/2000 CONVERTER BOX The product consists of a translator box which inputs the NMEA 0183 wind data sentence MWV. It translates the 0183 data into NMEA 2000 compliant wind data for connection via a ‘micro-c’ connector directly into an existing NMEA 2000 network.
9198 (Including tax)
+
Pre-Order
NASACLIP-CHWIND
Clipper Close Haul Meter This connects directly to the master wind unit. As well as repeating the wind speed it shows wind direction in high resolution when sailing close to - or running with the wind. Complete with 5M cable.
9850 (Including tax)
+