Lower Unit & Gearcase Components
There are no products in this section
-
All categories
-
-
-
-
- Oil Filters
- /
- Carb Kits
- /
- Starter
- /
- Alternator
- /
- Anode
- /
- Water Pumps
- /
- Impellers
-
- Filters
- /
- Thermostats
- /
- Anodes
- /
- Water Pumps
- /
- Impellers
-
-
-
-
-
- Mercury Prop 2.5-3.5hp 1990> Plastic Prop 7.25 x 6 inch
- /
- Mercury 4 - 6 HP (12 Tooth Spline Thru Hub Exhaust) Tohatsu Origin
- /
- Mercury 8 -9.9 hp 2-1/2 Gearcase 12 Tooth Spline
- /
- 6hp to 15hp 2.5" Gearcase (8 Tooth SPLINE & THRU HUB EXHAUST)
- /
- Mercury for 8hp-9.9 4 Stroke 2005 onwards
- /
- Mercury 9.9hp to 25hp 2 Stroke 10 Tooth Spline
- /
- 9.9HP Big Foot 4 Stroke 2005 & 15/20 2007 on
- /
- Mercury 25hp to 70hp
- /
- Mercury 40hp to 140hp
- /
- Mercury 135hp to 300hp
-
- Mariner Prop 2.5-3.5hp 1990>
- /
- Mariner 4 - 6 HP (12 Tooth Spline Thru Hub Exhaust) Tohatsu Origin
- /
- Mariner 6hp to 15hp
- /
- Mariner Propeller for 8hp 4 Stroke From 2005 onwards
- /
- Mariner 8 -9.9 hp 2-1/2 Gearcase 12 Tooth Spline
- /
- Mariner 9.9HP Big Foot 4 Stroke 2005 & 15/20 2007 on
- /
- Mariner 9.9hp to 25hp
- /
- Mariner 25hp to 70hp
- /
- Mariner 60hp to 140hp
- /
- Mariner 135hp to 300hp
- /
- view more
-
- Tohatsu/Nissan 2.5,3.5hp (plastic propeller)
- /
- Tohatsu/Nissan 4hp - 6hp (12 Tooth Spline)
- /
- Tohatsu/Nissan 8hp - 9.8hp (12 Tooth Spline)
- /
- Tohatsu/Nissan 9.9hp-20hp (14Tooth Spline)
- /
- Tohatsu/Nissan 25hp - 30hp (10 Tooth Spline)
- /
- Tohatsu/Nissan 35hp-55hp (13Tooth Spline)
- /
- Tohatsu/Nissan 60hp-140hp (15Tooth Spline)
-
-
- 3/f2.5 (9 Tooth Spline & Thru Hub EX Spline Drive
- /
- Yamaha 4-6hp 2 & 4 Stroke With 9 Splines
- /
- Yamaha 6HP TO 9.9 HP (7 Tooth Spline)
- /
- Yamaha 9.9hp to 20hp 8 Spline
- /
- Yamaha Pin Drive 8 HP
- /
- Yamaha 20hp - 30hp 10 Tooth Spline Thru Hub Exhaust
- /
- Yamaha Propellers From 25 to 60hp (13 Tooth Spline )
- /
- Yamaha 40hp Pin Drive
- /
- Yamaha 50hp - 130hp 4- 1/4 Gearcase 15 Tooth Spline&Thru Hub Exhaust
- /
- Yamaha 150hp - 300hp 4- 3/4 Gearcase 15 Tooth Spline & Thru Hub Exhaust
-
- Fits Aquamatic (Long Hub) SP Drive AQ280/AQ290
- /
- Fits Aquamatic (Standard "Short" Hub) SP Drive AQ280/AQ290
- /
- Fits SX Drive (3.0, 4.3, 5.0, 5.7, 5.8, 7.4, 8.2 L.)
- /
- Volvo Genuine Standard Hub Single Propellers
- /
- Volvo Genuine Long Hub Single Propellers
- /
- Volvo Duoprop Set "A & B Series Genuine Aluminium Propellers
- /
- Volvo Duoprop Set i Series Genuine Propellers For DPS & XDP Drives
- /
- Duoprop Set F Series Aftermarket
- /
- Volvo Duoprop F Series Prop Set Genuine
- /
- Volvo Duoprop Set J Series Genuine Aluminium Propellers
- /
- view more
-
- Johnson Evinrude Propellers From 5hp to 8hp PIN DRIVE ONLY
- /
- Johnson /Evinrude 9.9 HP TO 15 HP (13 Tooth & Thru Hub Exhaust)
- /
- Johnson /Evinrude 9.9 hp to 15hp (4 stroke 02-07 10 tooth spline)
- /
- Johnson /Evinrude 15 hp to 35hp (3"Gearcase 2 stroke 14 tooth spline)
- /
- Johnson Evinrude From 25hp to 30hp (4 STROKE 10 Tooth Spline)
- /
- Johnson /Evinrude 40hp to 75hp With Small Gearcase (13 tooth spline)
- /
- Johnson /Evinrude 40hp & 50hp ( 4 Stroke 13 Tooth Spline)
- /
- Johnson /Evinrude 45hp to 140hp WITH LARGE GEARCASE 13 Tooth Aluminum
- /
- Johnson /Evinrude 90hp to 140hp 4 STROKE MODELS ONLY
- /
- Johnson/Evinrude OMC Propellers From 90hp to 300hp Aluminum
- /
- view more
-
-
-
-
-
-
-
-
-
-
-
-
My Cart
For your security, all customer passwords were reset on 27 October. Please use "Forgot your password?" to set a new one.
-
All categories
-
-
-
-
- Oil Filters
- /
- Carb Kits
- /
- Starter
- /
- Alternator
- /
- Anode
- /
- Water Pumps
- /
- Impellers
-
- Filters
- /
- Thermostats
- /
- Anodes
- /
- Water Pumps
- /
- Impellers
-
-
-
-
-
- Mercury Prop 2.5-3.5hp 1990> Plastic Prop 7.25 x 6 inch
- /
- Mercury 4 - 6 HP (12 Tooth Spline Thru Hub Exhaust) Tohatsu Origin
- /
- Mercury 8 -9.9 hp 2-1/2 Gearcase 12 Tooth Spline
- /
- 6hp to 15hp 2.5" Gearcase (8 Tooth SPLINE & THRU HUB EXHAUST)
- /
- Mercury for 8hp-9.9 4 Stroke 2005 onwards
- /
- Mercury 9.9hp to 25hp 2 Stroke 10 Tooth Spline
- /
- 9.9HP Big Foot 4 Stroke 2005 & 15/20 2007 on
- /
- Mercury 25hp to 70hp
- /
- Mercury 40hp to 140hp
- /
- Mercury 135hp to 300hp
-
- Mariner Prop 2.5-3.5hp 1990>
- /
- Mariner 4 - 6 HP (12 Tooth Spline Thru Hub Exhaust) Tohatsu Origin
- /
- Mariner 6hp to 15hp
- /
- Mariner Propeller for 8hp 4 Stroke From 2005 onwards
- /
- Mariner 8 -9.9 hp 2-1/2 Gearcase 12 Tooth Spline
- /
- Mariner 9.9HP Big Foot 4 Stroke 2005 & 15/20 2007 on
- /
- Mariner 9.9hp to 25hp
- /
- Mariner 25hp to 70hp
- /
- Mariner 60hp to 140hp
- /
- Mariner 135hp to 300hp
- /
- view more
-
- Tohatsu/Nissan 2.5,3.5hp (plastic propeller)
- /
- Tohatsu/Nissan 4hp - 6hp (12 Tooth Spline)
- /
- Tohatsu/Nissan 8hp - 9.8hp (12 Tooth Spline)
- /
- Tohatsu/Nissan 9.9hp-20hp (14Tooth Spline)
- /
- Tohatsu/Nissan 25hp - 30hp (10 Tooth Spline)
- /
- Tohatsu/Nissan 35hp-55hp (13Tooth Spline)
- /
- Tohatsu/Nissan 60hp-140hp (15Tooth Spline)
-
-
- 3/f2.5 (9 Tooth Spline & Thru Hub EX Spline Drive
- /
- Yamaha 4-6hp 2 & 4 Stroke With 9 Splines
- /
- Yamaha 6HP TO 9.9 HP (7 Tooth Spline)
- /
- Yamaha 9.9hp to 20hp 8 Spline
- /
- Yamaha Pin Drive 8 HP
- /
- Yamaha 20hp - 30hp 10 Tooth Spline Thru Hub Exhaust
- /
- Yamaha Propellers From 25 to 60hp (13 Tooth Spline )
- /
- Yamaha 40hp Pin Drive
- /
- Yamaha 50hp - 130hp 4- 1/4 Gearcase 15 Tooth Spline&Thru Hub Exhaust
- /
- Yamaha 150hp - 300hp 4- 3/4 Gearcase 15 Tooth Spline & Thru Hub Exhaust
-
- Fits Aquamatic (Long Hub) SP Drive AQ280/AQ290
- /
- Fits Aquamatic (Standard "Short" Hub) SP Drive AQ280/AQ290
- /
- Fits SX Drive (3.0, 4.3, 5.0, 5.7, 5.8, 7.4, 8.2 L.)
- /
- Volvo Genuine Standard Hub Single Propellers
- /
- Volvo Genuine Long Hub Single Propellers
- /
- Volvo Duoprop Set "A & B Series Genuine Aluminium Propellers
- /
- Volvo Duoprop Set i Series Genuine Propellers For DPS & XDP Drives
- /
- Duoprop Set F Series Aftermarket
- /
- Volvo Duoprop F Series Prop Set Genuine
- /
- Volvo Duoprop Set J Series Genuine Aluminium Propellers
- /
- view more
-
- Johnson Evinrude Propellers From 5hp to 8hp PIN DRIVE ONLY
- /
- Johnson /Evinrude 9.9 HP TO 15 HP (13 Tooth & Thru Hub Exhaust)
- /
- Johnson /Evinrude 9.9 hp to 15hp (4 stroke 02-07 10 tooth spline)
- /
- Johnson /Evinrude 15 hp to 35hp (3"Gearcase 2 stroke 14 tooth spline)
- /
- Johnson Evinrude From 25hp to 30hp (4 STROKE 10 Tooth Spline)
- /
- Johnson /Evinrude 40hp to 75hp With Small Gearcase (13 tooth spline)
- /
- Johnson /Evinrude 40hp & 50hp ( 4 Stroke 13 Tooth Spline)
- /
- Johnson /Evinrude 45hp to 140hp WITH LARGE GEARCASE 13 Tooth Aluminum
- /
- Johnson /Evinrude 90hp to 140hp 4 STROKE MODELS ONLY
- /
- Johnson/Evinrude OMC Propellers From 90hp to 300hp Aluminum
- /
- view more
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGINE PARTS
-
PROPELLERS
-
- Mercury Prop 2.5-3.5hp 1990> Plastic Prop 7.25 x 6 inch
- Mercury 4 - 6 HP (12 Tooth Spline Thru Hub Exhaust) Tohatsu Origin
- Mercury 8 -9.9 hp 2-1/2 Gearcase 12 Tooth Spline
- 6hp to 15hp 2.5" Gearcase (8 Tooth SPLINE & THRU HUB EXHAUST)
- Mercury for 8hp-9.9 4 Stroke 2005 onwards
- Mercury 9.9hp to 25hp 2 Stroke 10 Tooth Spline
- View more →
-
- Fits Aquamatic (Long Hub) SP Drive AQ280/AQ290
- Fits Aquamatic (Standard "Short" Hub) SP Drive AQ280/AQ290
- Fits SX Drive (3.0, 4.3, 5.0, 5.7, 5.8, 7.4, 8.2 L.)
- Volvo Genuine Standard Hub Single Propellers
- Volvo Genuine Long Hub Single Propellers
- Volvo Duoprop Set "A & B Series Genuine Aluminium Propellers
- View more →
-
- Johnson Evinrude Propellers From 5hp to 8hp PIN DRIVE ONLY
- Johnson /Evinrude 9.9 HP TO 15 HP (13 Tooth & Thru Hub Exhaust)
- Johnson /Evinrude 9.9 hp to 15hp (4 stroke 02-07 10 tooth spline)
- Johnson /Evinrude 15 hp to 35hp (3"Gearcase 2 stroke 14 tooth spline)
- Johnson Evinrude From 25hp to 30hp (4 STROKE 10 Tooth Spline)
- Johnson /Evinrude 40hp to 75hp With Small Gearcase (13 tooth spline)
- View more →
-
-
- More PROPELLERS →
-
PAINTS & MAINTENANCE
-
SAFETY
-
CLOTHING
- OUTBOARDS
-
ELECTRICAL
-
WATERSPORTS
- TRADE ENQUIRIES
- RETURNS
- CATALOGUES
- GIFT CARD
Sidebar Subcategories Sidebar Subcategories
Lower Unit Part Diagrams (1314)
-
4 Stroke exploded diagram
(501)
- 2, 2.5, 3.5 HP (18)
- 4, 5, 6 HP (49)
- 8, 9.9 HP (209CC) (37)
- 8 HP BODENSEE (INTER.) • 9.9 HP (232 CC) • 13.5 HP (INTER) • 15 HP RATIO 2.00:1 • Ø TORPEDO 102 mm (36)
- 8 HP BODENSEE (INTER.) • 9.9 HP (232 CC) • 13.5 HP (INTER) • 15 HP RATIO 2.42:1 • Ø TORPEDO 130 mm (34)
- 8, 9.9, 10, 15, 20 HP COMMAND THRUST (17)
- 9.9, 10, 15, 20 HP (13)
- 25 EFI, 30 EFI (5)
- 25 HP • 30, 40 HP CARB (3CYL) EFI • 40 ITALY • 45 BODENSEE • 50 HP (38)
- 30, 40, 50, 60 HP (4 CYL) EFI • 40 CARB (3CYL) Ø TORPEDO 87.38 mm = 3.44” (46)
- 30, 150 HP (1987+) Ø TORPEDO BIG FOOT 107.95 mm = 4.25” (62)
- 135-300 HP VERADO 4 & 6 CYL 2006+ (43)
- 175, 200, 225 HP (3.4L) V6 V8 NEW MODELS Ø TORPEDO 5.44 (32)
- 225 EFI Ser. No. (0T653945+) (71)
-
2 Stroke exploded diagrams
(813)
- 2, 2.5, 3.5 HP (18)
- 4, 5, 6 HP (49)
- 6, 8 (2CYL) INTERN. 8, 9.8 SEAPRO (2 CYL) INTERN. (37)
- 6, 8, 9.9, 13.5, 15 HP (1986+) (36)
- 18XD, 20, 25 HP (1984+) (34)
- 25, 50 HP (38)
- 50, 55, 60 HP (3 CYL) (45)
- 30 - 125 HP (3 & 4 CYL IN LINE) (62)
- 2 HP 2B Ser. No. (6A1-000101+) (23)
- 2, 2.5 HP (8)
- 3.9, 4, 4.5, 7.5, 9.8 HP (1975-86) (19)
- 4 HP (6E0), 5HP (6E3) (35)
- 6C (6H8), 6D (6H6), 8C (6G1) (22)
- W8 (W MARATHON) (677-) 8K (680-) (19)
- 9.9 (682) 15 (684 / 6M7) (63)
- 20C (6A9) • 25C (695) • 30A (689) (36)
- K40 (6F5) • W40 (6F6) • 40C (TWIN CARB) (6E9) (41)
- 30 - 70 HP (2, 3, 4 CYL) (1977-97) (46)
- 60 (2 CYL) (675) (52)
- 2.0, 2.4, 2.5, V6 L4, L6, V6 (65-225 HP) (65)
- 3.0L: 225 CARB 225, 250EFI/DFI (65)
Lower Unit Part Diagrams (1314)
-
4 Stroke exploded diagram
(501)
- 2, 2.5, 3.5 HP (18)
- 4, 5, 6 HP (49)
- 8, 9.9 HP (209CC) (37)
- 8 HP BODENSEE (INTER.) • 9.9 HP (232 CC) • 13.5 HP (INTER) • 15 HP RATIO 2.00:1 • Ø TORPEDO 102 mm (36)
- 8 HP BODENSEE (INTER.) • 9.9 HP (232 CC) • 13.5 HP (INTER) • 15 HP RATIO 2.42:1 • Ø TORPEDO 130 mm (34)
- 8, 9.9, 10, 15, 20 HP COMMAND THRUST (17)
- 9.9, 10, 15, 20 HP (13)
- 25 EFI, 30 EFI (5)
- 25 HP • 30, 40 HP CARB (3CYL) EFI • 40 ITALY • 45 BODENSEE • 50 HP (38)
- 30, 40, 50, 60 HP (4 CYL) EFI • 40 CARB (3CYL) Ø TORPEDO 87.38 mm = 3.44” (46)
- 30, 150 HP (1987+) Ø TORPEDO BIG FOOT 107.95 mm = 4.25” (62)
- 135-300 HP VERADO 4 & 6 CYL 2006+ (43)
- 175, 200, 225 HP (3.4L) V6 V8 NEW MODELS Ø TORPEDO 5.44 (32)
- 225 EFI Ser. No. (0T653945+) (71)
-
2 Stroke exploded diagrams
(813)
- 2, 2.5, 3.5 HP (18)
- 4, 5, 6 HP (49)
- 6, 8 (2CYL) INTERN. 8, 9.8 SEAPRO (2 CYL) INTERN. (37)
- 6, 8, 9.9, 13.5, 15 HP (1986+) (36)
- 18XD, 20, 25 HP (1984+) (34)
- 25, 50 HP (38)
- 50, 55, 60 HP (3 CYL) (45)
- 30 - 125 HP (3 & 4 CYL IN LINE) (62)
- 2 HP 2B Ser. No. (6A1-000101+) (23)
- 2, 2.5 HP (8)
- 3.9, 4, 4.5, 7.5, 9.8 HP (1975-86) (19)
- 4 HP (6E0), 5HP (6E3) (35)
- 6C (6H8), 6D (6H6), 8C (6G1) (22)
- W8 (W MARATHON) (677-) 8K (680-) (19)
- 9.9 (682) 15 (684 / 6M7) (63)
- 20C (6A9) • 25C (695) • 30A (689) (36)
- K40 (6F5) • W40 (6F6) • 40C (TWIN CARB) (6E9) (41)
- 30 - 70 HP (2, 3, 4 CYL) (1977-97) (46)
- 60 (2 CYL) (675) (52)
- 2.0, 2.4, 2.5, V6 L4, L6, V6 (65-225 HP) (65)
- 3.0L: 225 CARB 225, 250EFI/DFI (65)
Buy with us
My account
Mpd Marine Parts Direct
Phone 01 8075144 (WHATS APP 085 2425936 message only)
Monday to Friday 9 AM - 5 PM Saturday 10 AM to 2 PM
N1 Business Park, Unit 7, Nevinstown West, Swords, Co. Dublin, K67 HT91